COMMUNITY GAMEPACKS
CRSED: F.O.A.D.

Anti-Recoil

🔴 Anti-Recoil

Recoil is when your weapon moves on its own while firing. Anti-Recoil reduces this erratic movement making your shots more accurate and more likely to hit your target. For example, without Anti-Recoil your weapon may pull up when you fire and with Anti-Recoil your weapon will stay on target and fire straight.

Each weapon in each game has a unique recoil pattern and when adjusted correctly Anti-Recoil simply combats the vertical (and sometimes horizontal) aspect of this. When the game causes the weapon to pull up, Anti-Recoil will pull the weapon down enough to level out your shot.

Info: Anti-Recoil values are different for each weapon, and the built-in Weapon Tracking System applies expert Anti-Recoil values and other Mod settings specific to the Primary or Secondary Weapon you are using. However, attachments can change the mechanics of the weapon, so we also provide the ability to fine-tune the horizontal and vertical X & Y-Axis for both Primary and Secondary weapons. Micro Low option will reduce the effect slightly while shooting and moving the analog sticks. Micro High will further increase this reduction effect. Both variations of Micro Anti Recoil may make micro-adjustments easier at longer ranges.



Jump Toggle: HOLD VIEW/TOUCHPAD + PRESS LT/L2 TO JUMP TO THE ANTI-RECOIL ADJUSTMENT MENU

Pro Tip: A higher value means a stronger recoil compensation, and a lower value means less recoil compensation. Anti-Recoil Vertical strength for both Primary and Secondary Weapons can be adjusted from -100 to 100, and Horizontal Strength from -100 to 100 in real-time by using the Zen OLED GamePack Adjustable Menu. This allows you to quickly tune your weapon directly from your controller while playing the game, and without having to unplug and connect your Zen to a PC. The new multi-stage recoil scales a weapon's pattern by a percentage. If you notice too much up or down movement decrease the Y value. Increasing Y will make up and down movement greater. Should you want to lessen left and right movement decrease X while increasing it will make these movements stronger.

In-game Deadzone, Sensitivity, and Response curves must match. If these do not match Anti Recoil will not perform as it should and reduce the accuracy of Anti Recoil.

If you are using the Inverted-Y Axis version of this Mod, the Invert Vertical Look In-Game option must be set to enabled.

Option

Description

Adjustable

Disabled

Anti-Recoil Mod & Quick Toggle is Disabled

No

Enabled

Anti-Recoil Mod is Enabled

Yes

Inverted-Y

Anti-Recoil Mod is Enabled Inverts Y Axis

Yes

Hybrid

Hybrid Anti-Recoil Mod is Enabled

Yes

Hybrid Inverted-Y

Hybrid Anti-Recoil Mod is Enabled Inverts Y Axis

Yes

Anti-Recoil Quick Toggle: HOLD LT/L2 & PRESS D-PAD DOWN

Select the Profile 1 Weapon you are using In-Game. The Weapon Tracking System will automatically manage Anti-Recoil, Fire Mods, and QuickScope settings to match the weapon you are using.

Here is what the GamePack is doing "under-the-hood" to your Mod settings while using this system:

  • Anti-Recoil - Applies expert Anti-Recoil values (ARs, SMGs, LMGs, and Semi-Auto Tactical Rifles)
  • Rapid Fire - Will only work with Semi-Auto Weapons & All 3 Round Burst Weapons
  • Dynamic Rapid Fire - Will work with all Weapons (No 3 Round Burst)
  • Burst Fire - Will only work with Full Auto Weapons (ARs, SMGs, LMGs - No 3 Round Burst)
  • QuickScope - Will only work with Sniper Rifles

There are a few things worth noting:

Halo gives you the ability to use attachments, however, all Mods in this GamePack are tuned to the weapon's default settings. These attachments can change the weapon mechanics so Anti-Recoil & Aim Assist adjustable modifiers will need to be tuned manually to compensate if you are using any of the following:



Both axis Primary/Secondary Vertical (Y) and Primary/Secondary Horizontal (X) can be adjusted in real-time to help compensate for any changes: If a weapon is pulling up too much, increase the Y value. If it's pulling down, decrease the Y value. When a weapon pulls left too much, increase the X value. If it pulls right, decrease it.

Important: Should go ever want to quickly edit Anti Recoil Hold View / Share + LT / L2. This will go straight to Anti Recoil adjustment. From here you are able to make adjustments for any weapon and any profile even while playing so you can see the changes being made in real-time. Once done just Press B / Circle once to save your settings. If you decide to want to jump to the Weapon Selection Menu: Hold View/Share + RT/R2. This gives you instant access to the weapon selection menu so you can select the weapon in use.

The Weapons table below will highlight what Class it belongs to and what Mods are being tracked and enabled by the Weapon Profile system. This applies to Anti-Recoil, and Fire Mods Mods.

  • Regular Fire
  • Rapid Fire
  • Barret m82a1 (Special)
  • Flammenwerfer 35
  • Hunter Crossbow
  • Leuchtpistole 34
  • M1 Bazooka
  • M2 Flamethrower
  • Panzerchreck
  • PTRD-41
  • PTRS 41
  • PzB 39
  • ROKS-3
  • AK103 (ASSUALT RIFLE)
  • AKM
  • AUG A1
  • M4A1
  • MG 13
  • SCAR-L
  • StG 44
  • Bren (LMG)
  • Browning
  • DP-27
  • Lewis gun
  • MG 42
  • RD-44
  • Erma EMP (SMGS)
  • HK UMP45
  • M1A1 Thompson
  • M1921AC
  • M3 SMG
  • M50 Reising
  • MP18
  • MP 40
  • MP5
  • PPD 34/38
  • PPS-42
  • PPSh-41
  • Schmeisser
  • Sten
  • AVS 36 (Rifle)
  • FG 42
  • Gewehr 43
  • M1A1
  • M1 Garand
  • SVT 40
  • Ithaca 37 (Shotguns)
  • Luftwaffe
  • SPAS-12
  • Winchester
  • Kar98k (Sniper)
  • Lebel 1886 M93
  • M1903 Springfield
  • Mosin M91
  • Mosin M91 "Infantry"
  • Ross Mk. III Rifle
  • Colt New Service (Pistols)
  • Colt Walker
  • Dreyse M1907
  • M1911A1 Colt
  • Mauser C96
  • Mauser C96 Mod.712
  • P08 Luger
  • TT
  • Walther P38

Select the Profile 2 Weapon you are using In-Game. The Weapon Tracking System will automatically manage Anti-Recoil, Fire Mods, and QuickScope settings to match the weapon you are using.

Profile 2 Weapon

This is the Profile 2 for your Weapon. Optimized Anti-Recoil values are automatically applied to each weapon and will change in real-time when you change your weapon. Depending on your Weapon other Mod settings will be activated or deactivated to ensure compatibility and optimal performance - we do the heavy lifting for you!

Profile 2 Weapon: Adjust Anti-Recoil Vertical (-100 - 100)

There are perks, blueprints, attachments, and other in-game options that can have an effect on your weapon's mechanics, so we give you the ability to adjust the Weapon Y-Axis to help compensate.

Profile 2 Weapon: Adjust Anti-Recoil Horizontal (-100 - 100)

There are perks, blueprints, attachments, and other in-game options that can have an effect on your weapon's mechanics, so we give you the ability to adjust the Weapon X-Axis to help compensate.

Weapon Information is identical to Primary Weapon (see above for full list).

🔴 Active Profile

New to this update is the ability to set a total of 8 separate loadouts. Each will let you set a weapon to use for the Primary and Secondary weapons. In addition to this, each loadout will allow for custom Anti Recoil adjustments to be stored. When a profile is active the weapons, and Anti Recoil settings associated with it are automatically loaded.

We have made things super easy should you want to quickly change profiles simply hold View / Share + LB / L1 to jump to Profile selection. Pick the one you would like to use then press B / Circle once. This sets and saves the chosen profile to be used.

Info:

Manual: To switch the Weapon Profile a toggle has to be pressed.

Automatic: The Weapon Profiles will be switched automatically when you switch weapons In-Game with the switch Weapon Button. When you use the Automatic Mode you can Re-sync to your Primary Weapon while holding the Weapon Switch Button for 2 seconds.

Option

Description

Profile 1

Sets Active Profile to Profile 1

Profile 2

Sets Active Profile to Profile 2

Profile 3

Sets Active Profile to Profile 3

Profile 4

Sets Active Profile to Profile 4

Profile 5

Sets Active Profile to Profile 5

🔴 Weapon Profile Switch Method

This GamePack has a built-in Weapon Tracking System, designed to intelligently manage Anti-Recoil and other Mod settings depending on which weapon you are using in-game so that mods do not conflict with normal gameplay. You can choose to switch from Primary to Secondary Weapon Profiles Automatically, or Manually with a Quick Toggle.

Pro Tip: When using the Auto Switch Method, the built-in Weapon Tracking System may become "desynced". For example, if you respawn with your Weapon 2 enabled but the Mod is detected and switched to the Weapon 1, or when navigating the in-game menu. To resync Weapon 1 or Weapon 2 use the same toggle as the manual switch.

Option

Description

Manual

Manually Switch Weapon 1 & Weapon 2 Weapon Profiles (View/Touchpad + B/Circle will load your Weapon 2. View/Touchpad + Pressing X/Square will load you Weapon 1).



Weapon 1 Weapon Switch: VIEW/TOUCHPAD + X/SQUARE

Green LED Indicates that Weapon 1 Profile is Active.



Weapon 2 Weapon Switch: VIEW/TOUCHPAD + B/CIRCLE

Red LED Indicates that Weapon 2 Profile is Active.

Automatic

Automatically switch weapons and corresponding Mod settings when you switch weapons in-game.

Weapon 1 Manual Switch Toggle: VIEW/TOUCHPAD + X/SQUARE

Weapon 2 Manual Switch: VIEW/TOUCHPAD + B/CIRCLE

PREVIOUS
In-Game Settings
NEXT
Aim Assist
Docs powered by Archbee