Aim Assist
Aim Assist is a common feature for console shooter games to compensate for the deficiency of using a controller. Most games' Aim Assist will snap towards the target if you're close to it keeping you on target.
This new "Aim Assist" is from the GPC Godfather himself "Batts". This MOD was reworked from the ground to provide the best possible tracking and stickiness when using a ZEN. The all new algorithm will keep its full potential even when used with Anti-Recoil MOD. Allowing you to effortlessly track a moving opponent whenever they are moving slow, fast or jumping. Never before has there been an "Aim Assist" this powerful, requiring minimal stick movement to keep up with targets.
Info: Aim Assist Adjustable Values
Aim Assist: ADS Strength (1 - 50): Set the strength of Aim Assist while aiming down sights and not firing. This controls intensity of the right stick movement. Higher values will shake more and be noticeable onscreen. This is in general good for close range and non sniper weapons. A lower value shake less generally which is better for far range and scoped weapons. It is recommended to use a balance which is how the default value has been set. If this is set too high and you do not like the screen shake then slightly lower the value of this variable.
Aim Assist: Fire Strength (1 - 50): Set the strength of Aim Assist while aiming down sights and firing. This controls intensity of the right stick movement. Higher values will shake more and be noticeable onscreen. This is in general good for close range and non sniper weapons. A lower value shake less generally which is better for far range and scoped weapons. It is recommended to use a balance which is how the default value has been set. If this is set too high and you do not like the screen shake then slightly lower the value of this variable.
Aim Assist: ADS Step (1 - 50): Set the speed of Aim Assist while aiming down sights and not firing. This controls how fast the right sticks rotates in a circular pattern. Higher values will rotate faster. This is in general good for close range and non sniper weapons. A lower value rotates slower generally which is better for far range and scoped weapons. It is recommended to use a balance which is how the default value has been set.
Aim Assist: Fire Step (1 - 50): Set the speed of Aim Assist while aiming down sights and firing. This controls how fast the right sticks rotates in a circular pattern. Higher values will rotate faster. This is in general good for close range and non sniper weapons. A lower value rotates slower generally which is better for far range and scoped weapons. It is recommended to use a balance which is how the default value has been set.
Jump Toggle: HOLD VIEW/TOUCHPAD + PRESS RB/R1 TO JUMP TO THE AIM ASSIST ADJUSTMENT MENU
Tip: What is the best way to set Aim Assist? A good starting point is to make ADS Strength +1 or +2 more than your deadzone and Fire Strength +5 above deadzone. The step values control how fast the aim assist moves. Slower is generally better for long range and faster for short range
Option | Description | Adjustable |
Disabled | Aim Assist & Quick Toggle is Disabled | No |
Standard | Aim Assist (Standard) is Enabled | Yes |
Spartan | Aim Assist (Spartan) is Enabled | No |
Standard Plus | Aim Assist (Standard Plus) is Enabled | Yes |
Spartan Plus | Aim Assist (Spartan Plus) is Enabled | No |
Taylor Assist V5 + Boost | Aim Assist (Taylor Assist V5 + Boost) is Enabled | No |
Taylor Assist V5 | Aim Assist (Taylor Assist V5) is Enabled | No |
Aim Assist Quick Toggle: HOLD LT/L2 & PRESS D-PAD LEFT
Set the type of movement that a Taylor Assist or Hybrid will move when active.
Option | Description |
Polar | Taylor Assist Type is set to Polar |
Linear | Taylor Assist Type is set to Linear |
Set the type of movement that a Taylor Assist or Hybrid will move when active.
Option | Description |
Circular | Taylor Assist Shape is set to Circular |
Tall Oval | Taylor Assist Shape is set to Tall Oval |
Wide Oval | Taylor Assist Shape is set to Wide Oval |
Vortex Oval | Taylor Assist Shape is set to Vortex Oval |
Spiral | Taylor Assist Shape is set to Spiral |
Helix | Taylor Assist Shape is set to Helix |