In-Game Settings
These are all of the settings required for the Mods to function correctly, and they also allow you to dramatically improve the quality and accuracy of your character's movement.
All default High on Life® Button Layout Presets are available in this GamePack including Bumper/Trigger Flip. Use Zen Studio's GCI or the Zen OLED GamePack Menu to select the layout you are using in-game, the GamePack will then automatically remap all Mods to your preferred choice.
Options |
|---|
Default |
Bumper/Trigger Swap (Swaps LT/L2 with LB/L1 & Swaps RT/R2 with RB/R1) |
All default High on Life® Stick Layout Presets are available in this GamePack. Use Zen Studio's GCI or the Zen OLED GamePack Menu to select the stick layout preset you are using in-game, the GamePack will then automatically remap all Mods to your preferred choice.
- MENU/OPTIONS button on your controller.
- OPTIONS section.
- X/SQUARE If using SWITCH STICKS.
Options |
|---|
Default |
Switch Sticks |
Sensitivity settings are essential to ensure smooth performance of either a Controller or Mouse on a console. Controller settings are a little more dialed into the defaults..
- MENU/OPTIONS button on your controller.
- CONTROLS section.
- SENSITIVITY Settings.
Sensitivity settings must be matched from In-Game to this GamePack.
- MENU/OPTIONS button on your controller.
- CONTROLS section.
- SENSITIVITY Settings.
This option is usually Off, however, if you prefer to game with an Inverted-Y axis, set the Invert Y-Axis to On and if you plan on using the Anti-Recoil Mod, be sure to set the Mod value to 'Inverted-Y Anti-Recoil'.
The only way to use an inverted controller scheme is to have the Anti-Recoil Mod set on "Inverted-Y" otherwise it is not supported.
- MENU/OPTIONS button on your controller.
- CONTROLS section.
- INVERT Y-AXIS TO ON
Display Current Slot Number in the upper right corner, this is extremely helpful when adding multiple of the same GamePack to more than one slot.
Options | Description |
|---|---|
Disabled | Display Current Slot Number is Disabled |
Enabled | Display Current Slot Number is Enabled and will show Slot Number in top right on the display. |
This option blocks all rumble signals sent from the game but still allows the GamePack to read in-game rumble frequencies which is used by several mods to measure timing. The In-Game Controller Vibration option must always be enabled.
This step is critical. If you don't enable In-Game Controller Vibration, several Mods in this GamePack may not function correctly.
- Press the MENU/OPTIONS button on your controller.
- Select OPTIONS.
- TAP RB/R1 navigate to CONTROLS.
- Enable VIBRATION.
Option | Description |
|---|---|
Disabled | Controller WILL receive rumbles |
Enabled | Controller WILL NOT receive rumbles |