Xbox® One
Cronus Zen supports all versions of the Xbox® One console, and all official Xbox® One controllers.
Remember, when using Cronus Zen, any supported device (controllers, mice, keyboards) will work with your Xbox® One console! 🎮🚀
Console Version | Supported |
|---|---|
Xbox® One | YES |
Xbox® One S | YES |
Xbox® One S (All Digital Edition) | YES |
Xbox® One X | YES |
Cronus Zen supports all variants of the Xbox® One controllers (USB & Xbox Wireless Adapter - Bluetooth is not supported).
Controller Model | USB | Adapter | Bluetooth |
|---|---|---|---|
Xbox® One (1537, 1697) | YES | YES | NO |
Xbox® One S (1708) | YES | YES | NO |
Xbox® Elite (1698) | YES | YES | NO |
Xbox® Elite Series 2 | YES | YES | NO |
The following are third-party licensed Xbox® One controllers that have been verified to work with Cronus Zen either by USB or Xbox Wireless Adapter.
Note: Some Xbox® One and Xbox® Series X|S controllers share identical names, but one may be supported by Zen and the other may not, so it's a good idea to know which model you have. They're easy to identify by the extra 'Capture' button (see image below).
If you're using a licensed Xbox® One controller that works but not listed here, we'd love to know! Reach out to us at cronus.support. 🥰
Xbox One Controller | USB | Bluetooth |
|---|---|---|
GameStop Wired | YES | NO |
GameStop Metallic Limited Edition | YES | NO |
Hori Horipad | YES | NO |
PowerA Enhanced | YES | NO |
PowerA Mini | YES | NO |
PowerA Fusion 2 | YES | NO |
PowerA Fusion Pro | YES | NO |
PowerA Pro Ex | YES | NO |
PowerA Spectra | YES | NO |
PowerA Star Wars Stormtrooper | YES | NO |
PDP Afterglow Prismatic | YES | NO |
Razer Atrox Arcade Stick | YES | NO |
Razer Atrox Dragon Ball Fighter Z | YES | NO |
Razer Wildcat | YES | NO |
Razer Wolverine Tournament Ed. | YES | NO |
Razer Wolverine Ultimate | YES | NO |
Scuf Prestige | YES | NO |
These controllers are NOT currently compatible with Cronus Zen:
- Xbox® One ThrustMaster ESWAP S PRO
- Xbox® One ThrustMaster ESWAP X PRO
- All unlicensed Xbox controllers
- All Flight Sticks
This guide will show you how to connect any controller to an Xbox® One console.
First make sure your Zen is updated to . If it isn't, you'll need to visit STEP 1: Update Firmware.
OK, Let's get after it.
- Connect the Cronus Zen to your PC using the PROG USB port.
- Open Zen Studio .
- Select the Device panel.
- Set the Emulator Output Protocol to XBOX ONE X/S.
- Xbox® One Controller (USB):
- Connect to the A1 USB port. That's it. 😁
- Crossover Gameplay:
- Other devices such as non-Xbox® controllers, mice, keyboards etc. use the A3 USB port, and also the A2 port if you need to connect two devices.
- You can also use a secondary device alongside an Xbox® One controller such as a mouse for enhanced aiming, or a keypad with dozens of assigned MACROs.
- Crossover Note:
- An Xbox® One controller must be connected to A1 while using any crossover device on an Xbox® One console.
- Bluetooth Pairing:
- Tap Zen's Bluetooth pairing button (P2) for pairing mode, then...
- DualSense® Controllers: There is currently no Bluetooth support. Use USB.
- Nintendo® Switch Controllers: Hold down sync button for pairing mode.
- DualShock® Controllers: Hold down SHARE + PS for pairing mode.
- Wireless Adapters:
- To achieve wireless support for Xbox® controllers, the Xbox Wireless Adapter is required. Plug it into A3, connect the Xbox® controller to A2 for a few seconds, then unplug. Soon, the LED on the Adapter and controller will turn solid white, indicating successful pairing.
- The Astro® C40 adapter can also be connected to A3.
🔋 IMPORTANT
Your controller might not charge when connected via Zen. Ensure its fully charged or equipped with fresh batteries to prevent disconnections.
🎧 WIRED HEADSETS
Considering the wide variety of headsets, controllers, and consoles, we can't promise full audio functionality for every combo, especially third-party controllers. However, many official controller USB setups are compatible.
Give yours a try and find out! 🎮